inverter,plc,drive,control
FX - FX0 - FX1S -FX1N - FX2N -FX2NC - FX3G - FX3U -FX3UC -( Q plc - AlfaHMI-PANEL AC DRIVES  Plc Cable Mitsubishi PLC software
programmable logic control
Mitsubishi FX-RTC  Real time clock chip
FX-RTC
Mitsubishi FX-EEPROM-4
Mitsubishi FX-EEPROM-4 Memory 4k programsteps
FX-EEPROM-4C
PLC ACCESSORY MEM CASSETTE, EEPROM, 4K CLOCK
FX-EEPROM-4C
Features
All the FX2NC base units have a slot for adding a memory and real-time clock cassettes.
The FX2NC-ROM-CE1 module contains both EEPROM memory and a real-time clock.
The FX2NC-EEPROM-16 provides only memory, without the clock feature, while the
FX2NC-RTC is a real-time clock cassette for the FX2NC PLCs without any additional memory.
Specifications
  FX2NC-EEPROM-16 FX2NC-EEPROM-4C FX2NC-EEPROM-16C FX2NC-RTC FX2NC-ROM-CE1

Memory type EEPROM EEPROM + RTC EEPROM + RTC RTC (real time clock) EEPROM + RTC
Number of steps 16,000 4,000 16,000 - 16,000
Protect switch Provided Provided Provided Not provided provided
Applicable PLC
  FX1S, FX1N, FX2N, FX2NC, FX3U ,
FX2NC-EEPROM-16 ,FX2NC-EEPROM-4C         
FX2NC-EEPROM-16C ,FX2NC-RTC         
FX2NC-ROM-CE1  
      

Features
The memory cassette can be installed at the main unit, and when installed,
the memory cassette’s internal program is used in place of the internal RAM memory.
The FX3U-FLROM-64L features additional data transfer buttons.
Specifications
  FX3U-FLROM-16 FX3U-FLROM-64 FX3U-FLROM-64L
Number of steps 16,000 64,000 64,000
Memory type Flash memory Flash memory Flash memory
Protect switch Provided Provided Provided
Data transfer buttons Not provided Not provided Provided
Dimensions (W x H x D)
mm 37 x 20 x 6.1 37 x 20 x 6.1 37 x 20 x 6.1

Applicable PLC
  FX1S FX1N FX2N FX2NC FX3U
FX3U-FLROM-16, FX3U-FLROM-64,FX3U-FLROM-64L         
Features
Remote terminal blocks allow users to place I/O modules at the point control.
The blocks can be used with FX2NC and FX-GM controllers
when appropriate inter connecting cable is used.

(Note)
These below listed products are not authorized by CE.
Specifications
  FX-16E-TB, FX-16E-TB/UL, FX-32E-TB ,FX-32E-TB/UL
Number of inputs up to 16 inputs or 16 outputs up to 16 inputs or
16 outputs up to 32 inputs or 32 outputs up to 32 inputs or 32 outputs
outputs
Application Connects directly to PLC input/output terminals.
Dimensions (W x H x D)
mm 150 x 55 x 45 150 x 55 x 45 150 x 55 x 45 150 x 55 x 45
Weightkg 0.3 0.3 0.3 0.3
   FX-RAM-8 FX-EPROM-8 FX2N-ROM-E1

Applicable PLC
  FX1S, FX1N ,FX2N, FX2NC, FX3U
FX1N-EEPROM-8L        
FX-EEPROM-4         
FX-EEPROM-8         
FX-EEPROM-16         
FX-RAM-8         
FX-EPROM-8         
FX2N-ROM-E1
 
FX-RAM-8C
FX-EEPROM-8
  FX-16EX-A1-TB/UL FX-16EX-A1-TB FX-16EYR-ES-TB/UL FX-16EYR-TB
Number of inputs 16 16 - -
outputs - - 16 16
Application AC100 to 120V input type AC100 to 120V input type for use with japanese spec. PLC Relay output type Relay output type for use with japanese spec. PLC
Dimensions (W x H x D)
mm 150 x 55 x 45 150 x 55 x 45 150 x 55 x 45 150 x 55 x 45
Weightkg 0.3 0.3 0.3 0.3

  FX-16EYS-ES-TB/UL FX-16EYT-ESS-TB/UL FX-16EYT-ES-TB/UL FX-16EYT-TB
Number of inputs - - - -
outputs 16 16 16 16
Application Triac output type Source transistor output type Sink transistor output type Sink transistor output type for use with japanese spec. PLC
Dimensions (W x H x D)
mm 150 x 55 x 45 150 x 55 x 45 150 x 55 x 45 150 x 55 x 45
Weightkg 0.3 0.3 0.3 0.3

Applicable PLC
  FX1S, FX1N, FX2N, FX2NC, FX3U
FX-16E-TB ,FX-16E-TB/UL,FX-32E-TB,FX-32E-TB/UL,FX-16EX-A1-TB/UL      
FX-16EX-A1-TB,FX-16EYR-ES-TB/UL ,FX-16EYR-TB,FX-16EYS-ES-TB/UL      
FX-16EYT-ESS-TB/UL,FX-16EYT-ES-TB/UL,FX-16EYT-TB      

Features
The battery buffers the internal RAM of the MELSEC PLC in the event of a voltage failure.
The battery F2-40BL can be used for all base units of the MELSEC FX2N series.
The battery FX2NC-32BL is suitable for all base units of the MELSEC FX2NC series and for the positioning modules FX2N-20GM.
The battery FX3U-32BL can be used for all base units of the MELSEC FX3U series.
Applicable PLC
  FX1S FX1N FX2N FX2NC FX3U
F2-40BL         
FX2NC-32BL       *  
FX3U-32BL
Features
The communication adapter enables remote placing of expansion blocks from the PLC CPU.
Specifications
  FX2N-CNV-BC
Weightkg 0.04
Dimensions (W x H x D)
mm 40 x 60.5 x 16.5

Applicable PLC
  FX1S FX1N FX2N FX2NC FX3U
FX2N-CNV-BC         
FX1N-5DM
The display module is inserted directly into the FX1S and FX1N series controllers and enables monitoring and editing of the data stored in the PLC.
FX-10DM-E
The control and display panel FX-10-DM-E provides a key-oriented user-interface and enables you to monitor and edit process data in the PLC.
The display is arranged in 2 rows of 16 characters each. Functions can be invoked and values can be edited using the panel keys.
FX3U-7DM, FX3U-7DM-HLD
The FX3U-7DM display module can be incorporated in the main unit, or can be installed in the enclosure using the FX3U-7DM-HLD display module holder.
Specifications
  FX1N-5DM FX-10DM-E FX3U-7DM FX3U-7DM-HLD
Power supply 5V DC±5%
(from base unit) 5V DC±5%
(from base unit) 5V DC
(from base unit) -
Current consumption
mA 110 220 20 -
Extension cable - - - Included
Weightkg 0.02 0.02 0.02 0.01
Dimensions (W x H x D)
mm 40 x 32 x 17 96 x 62 x 32 48 x 35 x 11.5 66.3 x 41.8 x 13

Applicable PLC
  FX1S FX1N FX2N FX2NC FX3U
FX1N-5DM        
FX-10DM-E      
FX3U-7DM         
FX3U-7DM-HLD         
FX-EEPROM-8
FX-RAM-8