inverter,plc,drive,control
FX - FX0 - FX1S -FX1N - FX2N -FX2NC - FX3G - FX3U -FX3UC -( Q plc - AlfaHMI-PANEL AC DRIVES  Plc Cable Mitsubishi PLC software
programmable logic control
FX-16EYS-ES/UL  16 Triac O/P
FX-8EYR-ES-UL Mitsubishi plc user manual / hand book
FX Series Programmable Controllers Hardware Manual  (Pdf)
MELSEC MEDOC – Start-up guide FOR DOS (Pdf)
MX CHANGE FOR MELSEC MEDOC PLUS (Pdf)
Melsec Medoc plus Beginner´s Manual  (Pdf)
FX INPUT AND OUTPUT TERMINAL BLOCKS USER'S GUIDE
FX-16EYT-ESS-UL  user manual
FX-8EYS-ES/UL  8 Triac O/P
FX-8EYT-ESS/UL   8 source transistor O/P
FX-8EYR-ES/UL  8 relay O/P
FX-16EYT-ESS/UL 16 source transistor O/P
FX-16EYR-ES/UL  16 relay O/P
FX-8ER-ES/UL  8 relay output for Mitsubishi plc
Extension block for Mitsubishi plc
FX-8EYR-ES-UL Terminal Blocks
Remote terminal blocks allow I/O modules to be placed at the point of control.
The blocks are connected with FX3UC main units using connector-type I/O cabling.
Model Number: FX-8EYR-ES-TB/UL
Stocked Item: YES
Rating: UL • cUL
Max. Number of Inputs/Outputs: 16 output
Integrated Inputs (Sink): yes
Integrated Outputs: 16
Output Type: Relay
Switching Voltage (Max.): 240VAC / 30VDC
Max. Output Current Per Output (A): 2
Max. Output Current Per 4 Outputs (A): 8
Dimensions (W x H x D) mm: 150 x 55 x 45
Applicable PLCs: FX - FX-8EYR-ES-UL
FX-8EYR-ES-UL
FX-16EYR-ES-TB-manual.pdf
FX-8EYR-ES-UL Terminal Blocks for MITSUBISHI FX PLC
Remote terminal blocks allow I/O modules to be placed at the point of control.
The blocks are connected with FX main units using connector-type I/O cabling.
    Remote Mount Terminal Blocks:
16 and 32 Point Passive - use for Sink/Source input or Source Transistor output
16 Point 110VAC Input
16 Point Relay Output
16 Point Source Transistor Output (0.5 Amp)
16 Point Sink Transistor Output (0.5 Amp)
16 Point Triac Output (0.5 Amp)
All features of Enhanced FX are Available on FX2C
FX2C - The Power of Enhanced FX, Plus Distributed I/O
    High I/O Count Base Racks combine with Remotely Mounted
Terminal Blocks to produce our most versatile Micro PLC
    Terminal Blocks Can Mount Up To 300 Feet From Base Unit
    Use Standard Ribbon Cable to Connect Terminal Blocks to Base
    Base Units in Four Sizes:
FX2C-64: 32 in, 32 out
FX2C-96 48 in, 48 out
FX2C-128: 64 in, 64 out
FX2C-160: 80 in, 80 out