inverter,plc,drive,control
FX - FX0 - FX1S -FX1N - FX2N -FX2NC - FX3G - FX3U -FX3UC -( Q plc - AlfaHMI-PANEL AC DRIVES  Plc Cable Mitsubishi PLC software
programmable logic control
Mitsubishi plc user manual / hand book
FX Series Programmable Controllers Hardware Manual  (Pdf)
MELSEC MEDOC – Start-up guide FOR DOS (Pdf)
MX CHANGE FOR MELSEC MEDOC PLUS (Pdf)
Melsec Medoc plus Beginner´s Manual  (Pdf)
FX1seriesHandyManual.pdf
WHAT-IS-SERIAL-COMMUNICATION ?
FX-2AD-PT Mitsubishi Melsec PLC Analogue Input Module.
2 X PT100 Analogue Inputs.-100°C - +600°C Range.
*** Introduction
The FX-2AD-PT
analog input block amplifies the
input from two platinum temperature sensors
(PT 100 3 wire, 10052), converts the data into a
12-bit digital reading, and transfers the results
to an FX series programmable controller. Optical
coupling is used to ensure that voltage
surges do not damage other parts of your
equipment.
*** Compatible Programmable Controllers
The FROM/TO instructions are used for transferring
data to/from the programmable controller.
Hence, versions 2.0 or subsequent versions of
the FX series programmable controllers (those
with serial no. of 13XXXX or larger) are required.
*** Unit Specifications
The FX-2AD-PT occupies 8 I/O's but does not
affect the addressing of input and output relays.
For the purposes of power consumption,
the FX-2AD-PT unit draws 30mA from the 5v rail
of the base unit.
*** Measuring Units
The FX-2AD-PT unit measures temperature in
Centigrade ("C) to a resolution of 0.2 "C, or in
Fahrenheit (OF) to a resolution of 0.36 OF.
*** Status Information
Information concerning the working status of
the FX-2AD-PT including error messages can
be sent to the programmable controller.
*** Suitable Sensors
3-wire, 100Q PT100 platinum temperature sensors
with the following specification are usable:
3850 PPM/"C (JIS C1604-1989)
(DIN 43760) 1
FX-2AD-PT
FX-2AD-PT SPECIAL FUNCTION BLOCK USER'S GUIDE
FX-2AD-PT USER MANUAL
FX-2AD-PT  PT100 probe interface
FX-4AD-TC  Thermo-couple interface
FX-1HC  High speed counter
FX-1PG-E  Pulse output
FX-16NP/NT  Net-mini interface
FX-16NP/NT-S3  Net-mini-S3 interface
FX-4AD  Analog to digital converter
FX-2DA  Digital to analog converter
Special function block for Mitsubishi plc