inverter,plc,drive,control
FX - FX0 - FX1S -FX1N - FX2N -FX2NC - FX3G - FX3U -FX3UC -( Q plc - AlfaHMI-PANEL AC DRIVES  Plc Cable Mitsubishi PLC software
programmable logic control
• MELSEC FX-20P-E is a programming/monitoring unit of the compact hand-held type.
• The liquid crystal display unit of 16 characters × 4 lines displays the program,
PLC operation status (monitoring), operation guidance and error messages.
MELSEC FX-20P-E is equipped with online mode and offline mode functionality. In the online
mode, the FX-20P-E directly accesses the memory with the connected PLC.In the offline mode,
the MELSEC FX-20P-E accesses the RAM built in itself. In addition, because the
MELSEC FX-20P-E is equipped with the inbuilt large capacitor, it can back up programs written in the
offline mode. (With power supply for 1 hour, the FX-20P-E can back up programs for a
maximum of 3 days.)
• The FX-20P-E reads writes programs and executes a monitor display in list format.
• When an optional product is combined, the FX-20P-E can work as a ROM writer for
memory cassettes available only with the FX Series PLC.
Programs cannot be written or changed while the PLC is in the RUN status.
Read Reads (displays) sequence programs in PLC.
Reads (displays) sequence programs in HPP.
Write
Writes sequence programs.
(Key inputs in the HPP → Program memory in the PLC)
Writes sequence programs.
(Key inputs in the HPP → Inbuilt HPP RAM)
Insert
Inserts instructions into sequence programs.
(Key inputs in the HPP → Program memory in the PLC)
Inserts instructions into sequence programs.
(Key inputs in the HPP → Inbuilt HPP RAM)
Delete
Deletes instructions from sequence programs.
(Key inputs in the HPP → Program memory in the PLC)
Deletes instructions from sequence programs.
(Key inputs in the HPP → Inbuilt HPP RAM)
Monitor Reads (displays) the operation status in PLC. −
Test
Forcibly writes.
(Keys in the HPP → Memory in the PLC) −
Others
• Changes over the program mode (online → offline).
• Checks programs.
(Checks programs saved in the PLC.)
• Transfers programs between the memory cassette.
(Memory in the PLC ↔ Memory cassette)
• Modifies parameters. (Key inputs in the HPP → Program memory in the PLC)
• Converts device Nos. in sequence programs.
(Key inputs in the HPP → Program memory in the PLC)
• Adjusts the buzzer sound volume.(Adjusts the sound volume of the buzzer issued
when a key in the HPP is pressed.)
• Clears the latch status.
(Key inputs in the HPP → Memory inside the PLC)
• Changes over the program mode (offline → online).
• Checks programs.(Checks programs saved in the PLC.)
• Transfers programs between the HPP and the FX
Series PLC. (Inbuilt HPP RAM ↔ Program memory in the PLC)
• Modifies parameters.(Key inputs in the HPP → Inbuilt HPP RAM)
• Converts device Nos. in sequence programs.(Key inputs in the HPP → Inbuilt HPP RAM)
• Adjusts the buzzer sound volume.(Adjusts the sound volume of the buzzer issued
when a key on the HPP is pressed.)
• Transfers programs between the HPP and a module. (Inbuilt HPP RAM ↔ Module)
MELSEC FX-20P-E
MITSUBISHI MELSEC FX-20P-E Features
FX-20P-E HANDY PROGRAMMING PANEL user manual
Dedicated programming for Mitsubishi plc
**FX-10P-E Programmes Mitsubishi Melsec FX PLC's.
**
FX-20P-E programming/monitoring unit of the compact hand-held type.
**GP-80 HGP +GP-80FXE-KIT ROM vvriter unit for the transferring
**MELSEC MEDOC For Melsec plc software
**FX-PCS/AT-EE floppy
**A6 GPP/PHP + FX-A6GPP-E-KIT
Mitsubishi plc user manual / hand book
FX Series Programmable Controllers Hardware Manual  (Pdf)
MELSEC MEDOC – Start-up guide FOR DOS (Pdf)
MX CHANGE FOR MELSEC MEDOC PLUS (Pdf)
Melsec Medoc plus Beginner´s Manual  (Pdf)
FX1seriesHandyManual.pdf
WHAT-IS-SERIAL-COMMUNICATION ?