inverter,plc,drive,control
FX - FX0 - FX1S -FX1N - FX2N -FX2NC - FX3G - FX3U -FX3UC -( Q plc - AlfaHMI-PANEL AC DRIVES  Plc Cable Mitsubishi PLC software
programmable logic control
Mitsubishi plc user manual / hand book
FX Series Programmable Controllers Hardware Manual  (Pdf)
MELSEC MEDOC – Start-up guide FOR DOS (Pdf)
MX CHANGE FOR MELSEC MEDOC PLUS (Pdf)
Melsec Medoc plus Beginner´s Manual  (Pdf)
FX1seriesHandyManual.pdf
WHAT-IS-SERIAL-COMMUNICATION ?
FX-16NP/NT INTERFACE UNIT FOR MITSUBISHI MELSEC FX PLC
FX-16NP/NT INTRODUCTION

** The FX-16NP/NT interface unit connects the FX programmable controller (or FX PC) to the
MELSECNET/MINI-S3 net work as a local station, or as a remote I/O unit of an A2C CPU.
** Use the AJ71PT32-S3 or A1SJ71PT32-S3 master unit or A2C CPU as the master station. Connect the
local station to the master station using twisted pair cable or optical fiber cable (A2C CPU can only use
twisted pair cable).
** Number of occupied stations: 2 stations
(Maximum number of stations: 64)
** Number of occupied input/output points: 16 input
points and 8 output points of the FX PC (24 I/O points in total)
** 8 input points and 8 output points can be transmitted on the network.
** Maximum distance for station-to-station transmission.
Optical fiber cable system: 50 m
Twisted pair cable system: 100 m
FX-16NP/NT INTERFACE UNIT
FX-16NP/NT USER MANUAL
FX-2AD-PT  PT100 probe interface
FX-4AD-TC  Thermo-couple interface
FX-1HC  High speed counter
FX-1PG-E  Pulse output
FX-16NP/NT  Net-mini interface
FX-16NP/NT-S3  Net-mini-S3 interface
FX-4AD  Analog to digital converter
FX-2DA  Digital to analog converter
Special function block for Mitsubishi plc