inverter,plc,drive,control
FX - FX0 - FX1S -FX1N - FX2N -FX2NC - FX3G - FX3U -FX3UC -( Q plc - AlfaHMI-PANEL AC DRIVES  Plc Cable Mitsubishi PLC software
programmable logic control
FX-16EX-A1-TB/UL,INPUT MODULE 16POINT AC INPUT for MITSUBISHI FX PLC
FX-16EX-A1-TB/UL
INPUT MODULE 16POINT AC INPUT for MITSUBISHI FX PLC
Category  Training Options 
Name Terminal block 
Model Name  FX-16EX-A1-TB FX-16EX-A1-TB 
Standard price  \25,000 \ 25,000 
Product Status Sale 
Delivery time   (charged product). 
Standard fit  UL/cUL UL / cUL 
Input Specifications  Connection form (M3.5 ) Terminal block (M3.5 screw)
PLC is connected to the connector. 
Input type  AC 110 AC Input 
Input signal voltage  AC100/120V +10%-15% 50/60Hz AC100 ~ 120V +10% -15% 50/60Hz 
Input signal current  4.7mA/AC100V 50Hz 4.7mA/AC100V 50Hz
6.2mA/AC110V 60Hz 6.2mA/AC110V 60Hz 
Input impedance 21kΩ/50Hz About 21kΩ/50Hz
18kΩ/60Hz About 18kΩ/60Hz 
Input sensitivity    ON  3.8mA/AC80V  Over 3.8mA/AC80V 
OFF 1.7mA/AC30V  1.7mA/AC30V following 
Response time 25/30ms 25 ~ 30ms
This response time does not include the response delay of the PLC. 
Input signal format  Voltage contacts have 
Circuit insulation Photocoupler isolation 
Input mode display LED ( 24V LED ) Without LED Type (With Power LED indicator 24V) 
Power consumption  1.2W(48mA DC24V) 1.2W (48mA DC24V)
FX2N-16EX-C 3.9W(160mA DC24V)
FX2N-16EX-Ai be connected to C, "3.9W (160mA DC24V)" is required. 
Input terminal block
FX-32E-TB/UL
FX-16EX-A1-TB/UL
FX-16E-TB/UL  FX-16E-TB/UL 16 pt (Direct input/output)
FX Series Programmable Controllers Hardware Manual  (Pdf)
MELSEC MEDOC – Start-up guide FOR DOS (Pdf)
MX CHANGE FOR MELSEC MEDOC PLUS (Pdf)
Melsec Medoc plus Beginner´s Manual  (Pdf)
FX-16E-TB/UL,16 point (Direct input) For
Mitsubishi Melsec FX PLC  user manual / hand book
FX INPUT AND OUTPUT TERMINAL BLOCKS user manual
FX-16E-TB user manual.pdf
FX-16EX-A1-TB/UL
INPUT MODULE 16POINT AC INPUT for MITSUBISHI FX PLC