inverter,plc,drive,control
FX - FX0 - FX1S -FX1N - FX2N -FX2NC - FX3G - FX3U -FX3UC -( Q plc - AlfaHMI-PANEL AC DRIVES  Plc Cable Mitsubishi PLC software
programmable logic control
FX-16EYS-ES/UL  16 Triac O/P
FX-8EYS-ES/UL  8 Triac O/P
FX-8EYT-ESS/UL   8 source transistor O/P
FX-8EYR-ES/UL  8 relay O/P
FX-16EYT-ESS/UL 16 source transistor O/P
FX-16EYR-ES/UL  16 relay O/P
FX-8ER-ES/UL  8 relay output for Mitsubishi plc
Extension block for Mitsubishi plc
Mitsubishi plc user manual / hand book
FX Series Programmable Controllers Hardware Manual  (Pdf)
MELSEC MEDOC – Start-up guide FOR DOS (Pdf)
MX CHANGE FOR MELSEC MEDOC PLUS (Pdf)
Melsec Medoc plus Beginner´s Manual  (Pdf)
FX INPUT AND OUTPUT TERMINAL BLOCKS USER'S GUIDE
FX-16EYT-ESS-UL  user manual
FX-16EYR-ES-TB-manual.pdf
input output modules for melsec plc
There are 3 different output types …
• Relay Outputs
• Triac Outputs
• Transistor Outputs
RELAY OUTPUTS
Relays are dry contacts, so whatever you input on the common is switched out
when the output is activated. This is the most common type of output module
used. Loads up to 2 Amps, 100VAC~240VAC or 30VDCcan be switched, with a
maximum of 8 Amps per Common. Most base units and extension modules
have 4 outputs per common.
TRIAC OUTPUTS
Triacs are solid state AC switches. When the output is active the module
connects the load to the AC source. Load switching is up to 0.3Amps, up 240
VAC per point, with a max of 0.8 Amps per Common. Each base unit or
extension module has up to 4 outputs per common.
TRANSISTOR OUTPUTS
Fast response is the main characteristic. Transistors are solid state DC
switches. When the output is active, the module connects the load to the DC
source. Load switching is up to 0.5Amps per point, up to 0.8 Amps per Common.
Voltage that can be switched is 5VDC- 30 VDC. 4 points per common is typical.
    Remote Mount Terminal Blocks:
16 and 32 Point Passive - use for Sink/Source input or Source Transistor output
16 Point 110VAC Input
16 Point Relay Output
16 Point Source Transistor Output (0.5 Amp)
16 Point Sink Transistor Output (0.5 Amp)
16 Point Triac Output (0.5 Amp)
All features of Enhanced FX are Available on FX2C
FX2C - The Power of Enhanced FX, Plus Distributed I/O
    High I/O Count Base Racks combine with Remotely Mounted
Terminal Blocks to produce our most versatile Micro PLC
    Terminal Blocks Can Mount Up To 300 Feet From Base Unit
    Use Standard Ribbon Cable to Connect Terminal Blocks to Base
    Base Units in Four Sizes:
FX2C-64: 32 in, 32 out
FX2C-96 48 in, 48 out
FX2C-128: 64 in, 64 out
FX2C-160: 80 in, 80 out