inverter,plc,drive,control
FX - FX0 - FX1S -FX1N - FX2N -FX2NC - FX3G - FX3U -FX3UC -( Q plc - AlfaHMI-PANEL AC DRIVES  Plc Cable Mitsubishi PLC software
programmable logic control
FX-232AW/AWC Optional Programming Port
Computer interface for mitsubishi plc
RS 422/ RS 232 CONVERTER adapter for Mitsubishi Melsec FX plc
FX-20P-CAB FX-10P/FX-20P ,FXOS,
FX1S, FXON, FX1N, FX2N, FX1NC, FX2NC

MIN-DIN 8PIN D-SUB 25PIN
2 ------------------------- 2
7 ------------------------- 3
3 ------------------------- 7
5 ------------------------- 12
1 ------------------------- 15
4 ------------------------- 16
6 ------------------------- 20
8 ------------------------- 24
4-8-21
13-17

FX-20P-CAB0 FX-10P-SETO/FX-20P-SETO
FX0S, FX1S, FX0N, FX1N, FX2N, FX1NC, FX2NC

MINI-DIN 8PIN MINI-DIN 8PIN
1 --------------------------- 1
2 --------------------------- 2
3 --------------------------- 3
4 --------------------------- 4
5 --------------------------- 5
6 --------------------------- 6
7 --------------------------- 7
8 --------------------------- 8


FX-20P-CABP TO FX0S, FX1S, FX0N,
FX1N, FX2N, FX2NC

D-SUB 25PIN MINI-DIN 8PIN
2 ------------------------------ 2
3 ------------------------------ 7
7 ------------------------------ 3
15----------- ------------------ 1
16----------- ------------------ 4
20----------- ------------------ 6
24----------- ------------------ 8
5-8-21
12-18----------- --------------- 5
1 ----------------------------- 1
2 ----------------------------- 3
3 ----------------------------- 2
5,6 -------------------------- 20
7 ----------------------------- 7
20----------- -------------- 5,6


F2-232CAB-1 TO PC PC 9PIN FX-232AW/AWC
2 ----------------------- 2
3 ----------------------- 3
74
8.6 --------------------- 20
4 ----------------------- 5.6
5 ----------------------- 7
1

F2-232CAB-2 PC9800 14PIN FX-232AW/AWC
1 -------------------- 2
9 -------------------- 3
2,4 ------------------ 20
11----------- -------- 5,6
14----------- -------- 7
12 - 13
FX-422CAB
FX-422CAB-150
FX1, FX2FX2C FX-422AW (C)
RS-232C / RS-422 Bian change.
FX0S, FX1S, FX0N, FX1N,
FX2N, FX1NC, FX2NC

D-SUB 25PIN D-SUB 25PIN
1 ----------------------------------- 1
2 ----------------------------------- 2
3 ----------------------------------- 3
4 ----------------------------------- 4
5 ----------------------------------- 5
7 ----------------------------------- 7
8 ----------------------------------- 8
12----------- ----------------------- 12
13----------- ----------------------- 1.3
15----------- ----------------------- 15
16 --------------------------------- 16
17----------- ----------------------- 17
18----------- ----------------------- 18
20-2120-21
24----------- ----------------------- 24
25----------- ----------------------- 25


FX-422CAB0 TOFX0S, FX1S,
FX0N, FX1N, FX2N, FX2NC
FX-422AW (C) RS-232C/RS-422
FX-232AW (C)

D-SUB 25pin MINI-DIN 8pin
2 -------------------------------- 2
3 -------------------------------- 7
7 -------------------------------- 3
12----------- ------------------- 5
15----------- -------------------- 1
16----------- -------------------- 4
20----------- -------------------- 6
24----------- -------------------- 8
5-8-21,18-25
  ERROR RESPONSE!!!
The host computer may use the ENQ command to check if the PC is ready to communicate.
A 5 second time out should be given before determining that the PC has not been connected,
Also a retry of 3 times is recommended before determining that there is no
ACK response from the PC,
If the PCiioes not recognize any signal, it will reply with a NAK (negative acknowledge) code.
Host computer to Programmable controller
Computer interface for Mitsubishi fx plc - sc-09
FX Series Programmable Controllers Hardware Manual  (Pdf)
MELSEC MEDOC – Start-up guide FOR DOS (Pdf)
MX CHANGE FOR MELSEC MEDOC PLUS (Pdf)
Melsec Medoc plus Beginner´s Manual  (Pdf)
Mitsubishi plc user manual / hand book