FX0S-30MR-DS,mitsubishi-melsec-PLC

FX0S-30MR-DS Mitsubishi Melsec PLC General Overview
The FX0S range of products offer users certain model variations which can .switch higher current output signals and receive AC input signals. As with all Mitsubishi 'brick' type controllers, the power supply, CPU and I/O components are presented in a single product. The FX0S is the smallest programmable controller of its kind manufactured by Mitsubishi. The FX0s is totally (100%) compatible in a programming sense with in FX0 counterpart.

FX0S-30MR-DS Features Include
Wide Tolerance Power Supply;
As with all FX Family programmable controllers, a Wide tolerance power supply means concern free use anywhere in the world.
AC Supply 100-240V +10%/-15%
User Friendly Features:
The FXos has a useful RTJN/STOP switch, allowing quick and easy operation yet it remains discreetly bidden next to the programming port In addition there is a single analog potentiometer which can be used to indirectly change data values, timer durations etc.
Flexible Mounting Arrangements:
AS Witb all FX Family programmable controllers users are offered the choice between 35mm DIN rail or the use of direct mounting facilities.
50/GQHz

FX0S-30MR-DS Mitsubishi Melsec PLC
Step Execution Time; 3.6 microsecs max
Program Capacity; 1.6K (800 program steps)
Size of Instruction Set; 20 basic, 2 step ladder, 35 applied (57 total)
Power Supply; 100-240 VAC, 12 VDC depending on model
Maximum Service Supply; 200 mA at 24 VDC
Maximum Number of; I/O 16 inputs, 14 outputs (depends on model; numbered in octal)
Input Rating; 24 VDC or 120 V (85-132 VAC) depending on model
Max. Output Relay Current; 2.5 A / point 8A / 4 point common (250 VAC/ 30 VDC)
Max. Transistor O/P Current; 0.5 A / point, 0.8 A / 4 point common (30 VDC)
512 general purpose internal flags (auxiliary relays)
56 special purpose internal flags (auxiliary relays)
64 states (for use in Step Ladder programs)
56 timers (minimum delay 0.01 sec)
Device Table 15 counters
4 single-phase high speed counters (maximum frequency 7kHz) or;
1 quadrature high speed counter (maximum frequency 2kHz)
32 data registers (including 2 non-volatile)
27 special purpose data registers

FX0S-30MR-DS Mitsubishi Melsec PLC Large Capacity Service Supply:
'Ihe lOios-'itScMR-ES units are equipped with a 200mA, 24VDCservice Supply. Uses ranf-e from sensor supplies to providing power for additional monitoring peripherals.
FX0S-30MR-DS Battery-less Backup:
Because of the use ofEEPROM memory in the FXos, any data which requires storage when the unit is powered down, does not rely on the quality or availability of a bt4l-tery to provide backup. This makes fflv user friendly AND a minimal maintenance product.
FX0S-30MR-DS High Powered Relay Outputs:
All models of the FXos have high powered relay outputs, these devices protide the ability to switch Currents up lo 2JAmps with an activation lime of approximately 10 msec.
FX0S-30MR-DS Smallest Unit Footprint:
The FXos products are the Smallest footprint programmable controllers available from Mitsubishi Flectric Yet the I'Xos ako bus high powered inputs and output facilities which make it ideal for 'Heavy Duty' applications.
FX0S-30MR-DS Mitsubishi Melsec PLC Choice of Input Devices:
Users can choose between standard DC transistor inputs providing biub speed counting and interrupt services (up to 7kHz) OR AC inputs uihicb can accept signals between 85-1.Wat SCrWlti, giving wide unci flexible use In beany engineering applications.

FX0S PLC handles a broad range of applications
in the low I/O count part of the automation
spectrum. The FX0S can be used simply to gain major savings
in panel space and labor costs when wiring panels, as opposed to
hard-wired relay panels. It also offers you the flexibility of
changing your control specification just by reprogramming, not
rewiring. The FX0S is also an ideal controller for users who are
familiar with the advantages of a PLC, but whose application
requires less than 30 I/O. Some of the benefits
the FX0S can offer you:
• Minimal learning curve before your application’s up and running
when you use Windows based GPP-WIN programming software.
The powerful Step Ladder
(STL) programming method (originated by Mitsubishi)
makes ladder logic programming even easier by isolating your
program into discrete operations in a sequence.
• The heart of a self-contained sequence
control system with or without our optional user
interfaces for a window on your machine’s
operation (see p. 10 for our HMI line up).